PLANET CS-2001 - Manual (Page 251)

240
Terms in One-Step IPSec
One-Step IPSec
 One-Step IPSec merely takes one step to complete settings
 Go to Policy Object > VPN > One-Step IPSec, and then refer to the
following to configure:
 Type a name for the connection in the Name field.
（Figure 11-1）
 Select a WAN port for WAN Interface.
 Select LAN and then select the Subnet / Mask addresses.
 Specify the IP address or domain name of the destination gateway in
Remote Gateway – Fixed IP or Domain Name.
 Specify the subnet and mask addresses in the Subnet / Mask fields.
 Type a word string as Pre-Shared Key String in the Pre-Shared Key
String field.
 Click OK.
 The device will automatically finish other related but necessary
settings and create a corresponding policy for the connection. （Figure
11-2, 11-3, 11-4, 11-5）
Figure 11-1 One-Step IPSec Settings
Figure 11-2 Setting Completed