RIGOL DG1000Z Series - Manual (Page 86)

RIGOL Chapter 2 Command System
2-74 DG1000Z Programming Guide
[:SOURce[]]:APPLy:DC
Syntax [:SOURce[]]:APPLy:DC [{|DEF}[,{|DEF}
[,{|DEFault|MINimum|MAXimum}]]]
Description Set the waveform of the specified channel to DC with the specified offset.
Parameter Name Type Range Default
[] Discrete 1|2 1
Real Refer to the “Explanation” 0V
DC
Explanation  When [:SOURce[]] or [] is omitted, the system sets the related
parameters of CH1 by default.
 and are not applicable to the DC function but they
must be specified as a placeholder.
 The range of is limited by the “Impedance”
( :OUTPut[]:IMPedance or :OUTPut[]:LOAD ) setting.
Return Format Set the waveform of the specified channel to DC with the specified offset.
Example :SOUR1:APPL:DC 1,1,2 /*Set the waveform of CH1 to DC with 2V
DC
offset*/
Related
Commands
:OUTPut[]:IMPedance
:OUTPut[]:LOAD