RIGOL DG1000Z Series - Manual (Page 42)

RIGOL Chapter 2 Command System
2-30 DG1000Z Programming Guide
*ESE
Syntax *ESE
*ESE?
Description Enable the bits to be reported to the status byte register in the standard event
register.
Query the bits enabled in the standard event register.
Parameter Name Type Range Default
Integer Refer to the “Explanation” None
Explanation  is a decimal value corresponding to the sum of the binary weights of
the bits to be reported to the status byte register in the standard event
register.
 When is set to 0, executing this command will clear the enable
register of the standard even register.
 If you have configured the instrument using the *PSC 1 command, the enable
register of the standard event register will be cleared at the next power-on of
the instrument; if you have configured the instrument using the *PSC 0
command, the enable register of the standard event register will not be
cleared at the next power-on of the instrument.
Return Format The query returns a decimal value corresponding to the sum of the binary weights
of the bits enabled in the standard event register.
Related
Command
*PSC
*ESR?
Syntax *ESR?
Description Query the event register of the standard event register.
Explanation The event register of the standard event register is read-only. Its bits are latched
and the event register will be cleared when you query it. Once a bit is set, the later
occurred events corresponding to that bit will be ignored until the register is cleared
by the query command or the *CLS command (used to clear the status).
Return Format The query returns a decimal value corresponding to the sum of the binary weights
of all the bits in the event register of the standard event register.
Related
Command
*CLS
*IDN?
Syntax *IDN?
Description Query the ID string of the instrument.
Return Format The query returns the ID string of the instrument. The return value consists of 4
parts separated by commas, for example,
Rigol Technologies,DG1062Z,DG1ZA000000001,00.01.03; wherein, the first part is
the manufacturer name, the second part is the instrument model, the third part is
the instrument serial number and the forth part is the digital board version number.