RIGOL DG1000Z Series - Manual (Page 144)

RIGOL Chapter 2 Command System
2-132 DG1000Z Programming Guide
[:SOURce[]][:MOD]:FSKey:INTernal:RATE
Syntax [:SOURce[]][:MOD]:FSKey:INTernal:RATE {|MINimum|MAXimum}
[:SOURce[]][:MOD]:FSKey:INTernal:RATE? [MINimum|MAXimum]
Description Set the FSK modulation rate of the specified channel.
Query the FSK modulation rate of the specified channel.
Parameter Name Type Range Default
[] Discrete 1|2 1
Real 2mHz to 1MHz 100Hz
Explanation  This command is only applicable to the internal modulation source
( [:SOURce[]][:MOD]:FSKey:SOURce ). The FSK modulation rate refers to the
frequency at which the output frequency “shifts” between the carrier frequency
and hop frequency ( [:SOURce[]][:MOD]:FSKey[:FREQuency] ).
 When [:SOURce[]] or [] is omitted, the system sets the related
parameters of CH1 by default.
Return Format The query returns the FSK modulation rate in scientific notation with 7 effective digits,
for example, 1.500000E+02 (the FSK modulation rate is 150Hz).
Example :SOUR1:FSK:INT:RATE 150 /*Set the FSK modulation rate of CH1 to 150Hz*/
:SOUR1:FSK:INT:RATE? /*Query the FSK modulation rate of CH1 and the
query returns 1.500000E+02*/
Related
Commands
[:SOURce[]][:MOD]:FSKey[:FREQuency]
[:SOURce[]][:MOD]:FSKey:SOURce