RIGOL DG1000Z Series - Manual (Page 131)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-119
[:SOURce[]][:MOD]:AM:INTernal:FREQuency
Syntax [:SOURce[]][:MOD]:AM:INTernal:FREQuency
{|MINimum|MAXimum}
[:SOURce[]][:MOD]:AM:INTernal:FREQuency? [MINimum|MAXimum]
Description Set the AM modulation frequency of the specified channel.
Query the AM modulation frequency of the specified channel.
Parameter Name Type Range Default
[] Discrete 1|2 1
Real 2mHz to 1MHz 100Hz
Explanation  This command is only applicable to the internal modulation source
( [:SOURce[]][:MOD]:AM:SOURce ).
 When [:SOURce[]] or [] is omitted, the system sets the related
parameters of CH1 by default.
Return Format The query returns the AM modulation frequency in scientific notation with 7 effective
digits, for example, 1.500000E+02 (the AM modulation frequency is 150Hz).
Example :SOUR1:AM:INT:FREQ 150 /*Set the AM modulation frequency of CH1 to
150Hz*/
:SOUR1:AM:INT:FREQ? /*Query the AM modulation frequency of CH1 and
the query returns 1.500000E+02*/
Related
Command
[:SOURce[]][:MOD]:AM:SOURce
[:SOURce[]][:MOD]:AM:INTernal:FUNCtion
Syntax [:SOURce[]][:MOD]:AM:INTernal:FUNCtion
[:SOURce[]][:MOD]:AM:INTernal:FUNCtion?
Description Set the AM modulation waveform of the specified channel.
Query the AM modulation waveform of the specified channel.
Parameter Name Type Range Default
[] Discrete 1|2 1
Discrete
SINusoid|SQUare|TRIangle|
RAMP|NRAMp|NOISe|USER
SINusoid
Explanation  This command is only applicable to the internal modulation source.
 When [:SOURce[]] or [] is omitted, the system sets the related
parameters of CH1 by default.
 SQUare: 50％ duty cycle; TRIangle: 50％ symmetry; RAMP: 100％
symmetry; NRAMp: 0％ symmetry; USER: the arbitrary waveform selected of
the specified channel.
Return Format The query returns SIN, SQU, TRI, RAMP, NRAMP, NOIS or USER.
Example :SOUR1:AM:INT:FUNC SQU /*Set the AM modulation waveform of CH1 to
square*/
:SOUR1:AM:INT:FUNC? /*Query the AM modulation waveform of CH1 and
the query returns SQU*/