RIGOL DG1000Z Series - Manual (Page 37)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-25
:DISPlay:MODE
Syntax :DISPlay:MODE {DPV|DGV|SV}
:DISPlay:MODE?
Description Set the display mode to dual-channel parameters (DPV), dual-channel graph (DGV)
or single-channel (SV) display mode.
Query the display mode.
Parameter Name Type Range Default
{DPV|DGV|SV} Discrete DPV|DGV|SV DPV
Explanation  Dual-channel parameters (DPV): display the parameters and waveforms of the
two channels in both the digital and graph forms.
 Dual-channel graph (DGV): display the waveforms of the two channels in
graph form.
 Single-channel (SV): display the parameters and waveform of the channel
currently selected in both the digital and graph forms.
Return Format The query returns DPV, DGV or SV.
Example :DISP:MODE DGV /*Set the display mode to dual-channel graph*/
:DISP:MODE? /*Query the display mode and the query returns DGV*/
:DISPlay:SAVer:IMMediate
Syntax :DISPlay:SAVer:IMMediate
Description Enable the screen saver immediately without waiting.
:DISPlay:SAVer[:STATe]
Syntax :DISPlay:SAVer[:STATe] {ON|1|OFF|0}
:DISPlay:SAVer[:STATe]?
Description Enable or disable the screen saver function.
Query the on/off status of the screen saver function.
Parameter Name Type Range Default
{ON|1|OFF|0} Bool ON|1|OFF|0 ON
Explanation When the screen saver function is enabled, the instrument enters the screen saver
mode automatically when you stop operating the instrument for more than 15
minutes and it enters the black screen state automatically after another 30 minutes.
Return Format The query returns ON or OFF.
Example :DISP:SAV OFF /*Disable the screen saver function*/
:DISP:SAV? /*Query the on/off status of the screen saver function and the
query returns OFF*/
:DISP:SAV 1 /*Enable the screen saver function*/
:DISP:SAV? /*Query the on/off status of the screen saver function and the
query returns ON*/