RIGOL DG1000Z Series - Manual (Page 207)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-195
:SYSTem:COMMunicate:LAN:SMASk
Syntax :SYSTem:COMMunicate:LAN:SMASk
:SYSTem:COMMunicate:LAN:SMASk?
Description Set the subnet mask.
Query the subnet mask.
Parameter Name Type Range Default
ASCII string Refer to the “Explanation” None
Explanation  This command is only valid when the ManualIP configuration mode is turned on
( :SYSTem:COMMunicate:LAN:STATic[:STATe] ).
 The format of is nnn.nnn.nnn.nnn; wherein, nnn ranges from 0 to 255.
It is recommended that users acquire an available subnet mask from their
network administrator.
 After sending this comammd, the new settings will only take effect when
the :SYSTem:COMMunicate:LAN:APPLy command is executed to apply the
current network parameters.
 The subnet mask must be continuous, namely the 1 and 0 must be continuous.
Return Format The query returns a string, for example, 255.255.255.0.
Example :SYST:COMM:LAN:SMAS 255.255.255.0 /*Set the subnet mask to 255.255.255.0*/
:SYST:COMM:LAN:SMAS? /*Query the subnet mask and the query
returns 255.255.255.0*/
Related
Commands
:SYSTem:COMMunicate:LAN:APPLy
:SYSTem:COMMunicate:LAN:STATic[:STATe]