RIGOL DG1000Z Series - Manual (Page 175)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-163
[:SOURce[]]:SWEep:HTIMe[:STOP]
Syntax [:SOURce[]]:SWEep:HTIMe[:STOP] {|MINimum|MAXimum}
[:SOURce[]]:SWEep:HTIMe[:STOP]? [MINimum|MAXimum]
Description Set the stop hold of the sweep function of the specified channel.
Query the stop hold of the sweep function of the specified channel.
Parameter Name Type Range Default
[] Discrete 1|2 1
Real 0s to 500s 0s
Explanation  Stop Hold is the duration that the output signal outputs with the “Stop
Frequency” after the signal generator has swept from the “Start Frequency”
( [:SOURce[]]:FREQuency:STARt ) to the “Stop Frequency”
( [:SOURce[]]:FREQuency:STOP ).
 When [:SOURce[]] or [] is omitted, the system sets the related
parameters of CH1 by default.
 After the “Stop Hold” is modified, the signal generator will output the sweep
waveform from the specified “Start Frequency”.
Return Format The query returns the stop hold in scientific notation with 7 effective digits, for
example, 1.000000E+00 (the stop hold is 1s).
Example :SOUR1:SWE:HTIM 1 /*Set the stop hold of the sweep function of CH1 to 1s*/
:SOUR1:SWE:HTIM? /*Query the stop hold of the sweep function of CH1 and the
query returns 1.000000E+00*/
Related
Commands
[:SOURce[]]:FREQuency:STARt
[:SOURce[]]:FREQuency:STOP