RIGOL DG1000Z Series - Manual (Page 200)

RIGOL Chapter 2 Command System
2-188 DG1000Z Programming Guide
:SYSTem:BEEPer[:IMMediate]
Syntax :SYSTem:BEEPer[:IMMediate]
Description The beeper generates a beep immediately.
Explanation This command will not be affected by the current on/off status of the beeper. The
beeper will generate a beep immediately when this command is sent even if the
beeper is currently turned off.
:SYSTem:BEEPer:STATe
Syntax :SYSTem:BEEPer:STATe {ON|1|OFF|0}
:SYSTem:BEEPer:STATe?
Description Turn on or off the beeper.
Query the beeper status.
Parameter Name Type Range Default
{ON|1|OFF|0} Bool ON|1|OFF|0 ON
Explanation When the beeper is turned on, the beeper beeps when error occurs during
front-panel operation or remote operation.
Return Format The query returns ON or OFF.
Example :SYST:BEEP:STAT 1 /*Turn on the beeper */
:SYST:BEEP:STAT? /*Query the beeper status and the query returns ON*/
:SYSTem:CHANnel:CURrent
Syntax :SYSTem:CHANnel:CURrent {CH1|CH2}
:SYSTem:CHANnel:CURrent?
Description Select the current channel.
Query the current channel.
Parameter Name Type Range Default
{CH1|CH2} Discrete CH1|CH2 CH1
Return Format The query returns CH1 or CH2.
Example :SYST:CHAN:CUR CH2 /*Select CH2 as the current channel*/
:SYST:CHAN:CUR? /*Query the current channel and the query returns
CH2*/
:SYSTem:CHANnel:NUMber?
Syntax :SYSTem:CHANnel:NUMber?
Description Query the number of channels of the instrument.
Return Format The query returns an integer.
Example :SYST:CHAN:NUM? /*Query the number of channels of the instrument and the
query returns 2*/