RIGOL DG1000Z Series - Manual (Page 212)

RIGOL Chapter 2 Command System
2-200 DG1000Z Programming Guide
:SYSTem:POWeron
Syntax :SYSTem:POWeron {DEFault|LAST}
:SYSTem:POWeron?
Description Set the power-on state to default (DEFault) or last (LAST).
Query the power-on state.
Parameter Name Type Range Default
{DEFault|LAST} Discrete DEFault|LAST DEFault
Explanation  DEFault: the factory default values, except the parameters (such as the
language) that will not be affected by the reset operation. For the details,
please refer to “Appendix B: Factory Setting”.
 LAST: include all the system parameters and states (except the channel output
on/off state and the clock source).
Return Format The query returns DEFAULT or LAST.
Example :SYST:POW LAST /*Set the power-on state to last*/
:SYST:POW? /*Query the power-on state and the query returns LAST*/
:SYSTem:PRESet
Syntax :SYSTem:PRESet
{DEFault|USER1|USER2|USER3|USER4|USER5|USER6|USER7|USER8|
USER9|USER10}
Description Restore the instrument to the default state (DEFault) or recall the specified
user-stored state file (USER1 to USER10) in the internal memory of the instrument.
Parameter Name Type Range Default
{DEFault|USER1|USER2|
USER3|USER4|USER5|
USER6|USER7|USER8|
USER9|USER10}
Discrete
DEFault|USER1|USER2|
USER3|USER4|USER5|
USER6|USER7|USER8|
USER9|USER10
None
Explanation USER1 to USER10 denotes the files stored in the state file storage locations 1 to 10
in the internal memory of the instrument respectively. The state file can only be
recalled when the specified storage location in the internal memory contains a state
file.
Example Assume that the state file storage location 1 in the internal memory of the
instrument contains a state file,
:SYSTem:PRESet USER1 /*Recall the state file stored in the state file storage
location 1 in the internal memory of the
instrument*/