RIGOL DG1000Z Series - Manual (Page 39)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-27
:DISPlay:TEXT[:SET]
Syntax :DISPlay:TEXT[:SET] [,x[,y]]
Description Display the specified string from the specified coordinate on the screen.
Parameter Name Type Range Default
ASCII string
Refer to the
“Explanation”
None
x Integer 2 to 319 2
y Integer 2 to 239 2
Explanation  is a string enclosed in double quotation marks (note that the
double quotation marks at the outermost of the string are not displayed on the
screen), for example, ”RIGOL”. The specified string can contain up to 45
characters and the command is invalid when the specified string exceeds 45
characters. The specified string will be truncated when it cannot be displayed in
a single row.
 The x and y in [,x[,y]] denotes the coordinate setting values of the X axis (the
horizontal axis) and Y axis (the vertical axis) respectively (the coordinate values
set are the coordinate values of the upper-left corner of the string displayed on
the screen). When only one coordinate value is specified, the instrument treated
it as the horizontal axis value (x) by default. When the parameters are omitted,
the instrument displays the specified string from the last effective coordinate (if
no coordinate has been set after power-on, the default coordinate will be used).
 You can send the :DISPlay:TEXT? command to query the string currently
displayed on the screen or send the :DISPlay:TEXT:CLEar command to clear the
string currently displayed on the screen.
Return Format The query returns a string enclosed in double quotation marks and the content in the
double quotation marks is the content currently displayed on the screen (the double
quotation marks at the outermost of the string are not displayed on the screen), for
example, ”RIGOL”.
Example :DISP:TEXT "RIGOL",25,35 /*Display the string RIGOL from (25,35) on the
screen*/
Related
Commands
:DISPlay:TEXT?
:DISPlay:TEXT:CLEar