RIGOL DG1000Z Series - Manual (Page 57)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-45
:MEMory:STATe:RECall:AUTO
Syntax :MEMory:STATe:RECall:AUTO {ON|1|OFF|0}
:MEMory:STATe:RECall:AUTO?
Description Set the instrument configuration to be used at the next power-on to last (ON or 1)
or default (OFF or 0).
Query the instrument configuration to be used at the next power-on.
Parameter Name Type Range Default
{ ON|1|OFF|0} Bool ON|1|OFF|0 OFF
Explanation  Last (ON or 1): the instrument uses the system configuration (include all the
system parameters and states except the channel on/off state) used before
the last power-off.
 Default (OFF or 0): the instrument uses the factory default at power-on except
the parameters that will not be affected by a factory reset (refer to “Appendix
B: Factory Setting”).
Return Format The query returns ON or OFF.
Example :MEM:STAT:RECall:AUTO ON /*Set the instrument configuration to be used at
the next power-on to last*/
:MEM:STAT:RECall:AUTO? /*Query the instrument configuration to be used at
the next power-on and the query returns ON*/
:MEMory:STATe:VALid?
Syntax :MEMory:STATe:VALid?
{USER1|USER2|USER3|USER4|USER5|USER|6USER7|USER8|USER9|USER10}
Description Query whether the specified storage location in the internal non-volatile memory of
the instrument contains a state file.
Parameter Name Type Range Default
{USER1|USER2|USER3|
USER4|USER5|USER6|
USER7|USER8|USER9|
USER10}
Discrete
USER1|USER2|USER3|
USER4|USER5|USER6|
USER7|USER8|USER9|
USER10
None
Explanation The internal non-volatile memory of the instrument provides 10 state file storage
locations numbered USER1 to USER10 which representing the state files stored in
the specified locations respectively.
Return Format The query returns 1 or 0; wherein, 1 denotes that the specified storage location
contains a state file and 0 denotes that the specified storage location does not
contain a state file.