RIGOL DG1000Z Series - Manual (Page 189)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-177
[:SOURce[]][:TRACe]:DATA:LOCK[:STATe]
Syntax [:SOURce[]][:TRACe]:DATA:LOCK[:STATe] ,{ON|OFF|1|0}
[:SOURce[]][:TRACe]:DATA:LOCK[:STATe]?
Description Lock or unlock the arbitrary waveform data file stored.
Query whether the specified arbitrary waveform data file stored is locked.
Parameter Name Type Range Default
[] Discrete 1|2 1
ASCII string
Filenames of the arbitrary
waveform files stored
None
{ON|OFF|1|0} Bool ON|OFF|1|0 OFF
Explanation The locked arbitrary waveform data file cannot be deleted
( [:SOURce[]][:TRACe]:DATA:DELete[:NAME] ).
Return Format The query returns ON or OFF.
Example :DATA:LOCK 000.RAF,ON /*Lock the arbitrary waveform data file 000.RAF*/
:DATA:LOCK? 000.RAF /*Query whether the arbitrary waveform data file
000.RAF is locked and the query returns ON*/
Related
Command
[:SOURce[]][:TRACe]:DATA:DELete[:NAME]
[:SOURce[]][:TRACe]:DATA:POINts
Syntax [:SOURce[]][:TRACe]:DATA:POINts
VOLATILE[,|MINimum|MAXimum]
[:SOURce[]][:TRACe]:DATA:POINts? VOLATILE[,MINimum|MAXimum]
Description Set the number of initial points of the waveform editing.
Query the number of initial points of the waveform editing.
Parameter Name Type Range Default
[] Discrete 1|2 1
Integer 8 to 16384 8
Explanation  After this command is sent, the instrument switches the output mode to
arbitrary waveform (volatile waveform) automatically and initializes the volatile
waveform to waveform with the specified number of points of which the
amplitudes are 0. At this point, you can send the
[:SOURce[]][:TRACe]:DATA:VALue command to set the amplitude of the
specified point.
Return Format The query returns an integer between 8 and 16384.
Example :DATA:POIN VOLATILE,9 /*Set the number of initial points of the waveform
editing to 9*/
:DATA:POIN? VOLATILE /*Query the number of initial points of the waveform
editing and the query returns 9*/
Related
Command
[:SOURce[]][:TRACe]:DATA:VALue