RIGOL DG1000Z Series - Manual (Page 185)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-173
[:SOURce[]][:TRACe]:DATA:DAC16
Syntax [:SOURce[]][:TRACe]:DATA:DAC16 VOLATILE,,
Description Download waveform table to the DDRII internal memory.
Parameter Name Type Range Default
[] Discrete 1|2 1
ASCII string Refer to the “Explanation” None
Explanation  The command consists of two parts; wherein, the first part is the command
string ([:TRACe]:DATA:DAC16 VOLATILE,,) and the second part is the
binary data (). denotes the data transimmision status and can
be set to CON or END; wherein, CON denotes that there is still data package
after this one; END denotes that this is the last data package and the data
transimission finishes. denotes the binary data to be downloaded,
the length of the data is 8pts (16Bytes) to 16kpts (32kBytes).
 is a binary data block start with #. For example, #516384 binary data,
the number 5 behind # denotes that the data length information (16384)
occupies 5 characters; 16384 denotes the number of bytes of the binary data
following it. The range of each binary data is from 0000 to 3FFF. Each
waveform point occupies 2 bytes, therefore the number of bytes must be an
even number.
 When in the command is set to END, the instrument switches to
arbitrary waveform output automatically.