RIGOL DG1000Z Series - Manual (Page 52)

RIGOL Chapter 2 Command System
2-40 DG1000Z Programming Guide
:LXI:MDNS:SNAMe[:RESolved]?
Syntax :LXI:MDNS:SNAMe[:RESolved]?
Description Query the service name of mDNS analyzed.
:LXI:RESet
Syntax :LXI:RESet
Description Reset the LAN setting to the known operation state, beginning from DHCP. If DHCP
fails, AutoIP will be used.
Explanation  Several seconds are required for the LAN interface to restart (depending on
your network) after sending this command.
 If the LAN interface or specific LAN service is disabled, you must restart the
interface or service separately as well as turn off and restart the instrument to
make the LAN works normally.
:LXI:RESTart
Syntax :LXI:RESTart
Description Restart the LAN according to the current setting.
Explanation  Several seconds are required for the LAN interface to restart (depending on your
network) after sending this command.
 If the LAN interface or specific LAN service is disabled, you must restart the
interface or service separately as well as turn off and restart the instrument to
make the LAN works normally.