RIGOL DG1000Z Series - Manual (Page 204)

RIGOL Chapter 2 Command System
2-192 DG1000Z Programming Guide
:SYSTem:COMMunicate:LAN:DNS
Syntax :SYSTem:COMMunicate:LAN:DNS
:SYSTem:COMMunicate:LAN:DNS?
Description Set the DNS (Domain Name Service) address.
Query the DNS address.
Parameter Name Type Range Default
ASCII string Refer to the “Explanation” None
Explanation  This command is only valid when the ManualIP configuration mode is turned on
( :SYSTem:COMMunicate:LAN:STATic[:STATe] ).
 The format of
from 1 to 223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available DNS address from their network
administrator.
 After sending this command, the new settings will only take effect when
the :SYSTem:COMMunicate:LAN:APPLy command is executed to apply the
current network parameters.
Return Format The query returns a string, for example, 202.106.46.151.
Example :SYST:COMM:LAN:DNS 202.106.46.151 /*Set the DNS address to
202.106.46.151*/
:SYST:COMM:LAN:DNS? /*Query the DNS address and the query
returns 202.106.46.151*/
Related
Commands
:SYSTem:COMMunicate:LAN:APPLy
:SYSTem:COMMunicate:LAN:STATic[:STATe]
:SYSTem:COMMunicate:LAN:DOMain
Syntax :SYSTem:COMMunicate:LAN:DOMain
:SYSTem:COMMunicate:LAN:DOMain?
Description Set the domain name.
Query the domain name.
Parameter Name Type Range Default
ASCII string Refer to the “Explanation” YYYRigolLan
Explanation is the specified domain name and cannot exceeds 99 characters (can
include English characters and numbers).
Return Format The query returns a string.
Example :SYST:COMM:LAN:DOM RIGOL /*Set the domain name to RIGOL*/
:SYST:COMM:LAN:DOM? /*Query the domain name and the query
returns RIGOL*/