Source[]]:marker[:state – RIGOL DG1000Z Series User Manual
Page 128

RIGOL
2-116
DG1000Z Programming Guide
[:SOURce[
Syntax
[:SOURce[
[:SOURce[
Description
Enable or disable the frequency mark function of the specified channel.
Query the on/off status of the frequency mark function of the specified channel.
Parameter
Name
Type
Range
Default
[
Discrete
1|2
1
{ON|1|OFF|0}
Bool
ON|1|OFF|0
OFF
Explanation
The sync signal outputted from the [CH1/Sync/Ext Mod/Trig/FSK]
connector corresponding to the specified channel at the rear panel always
changes from low level to high level at the start of each sweep. The sync signal
changes from high level to low level at the center frequency point when the
“Mark” function is disabled or at the specified mark frequency point when the
“Mark” function is enabled.
When [:SOURce[
parameters of CH1 by default.
Return Format
The query returns ON or OFF.
Example
:SOUR1:MARK ON /*Enable the frequency mark function of CH1*/
:SOUR1:MARK? /*Query the on/off status of the frequency mark function of
CH1 and the query returns ON*/