RIGOL DG1000Z Series - Manual (Page 51)

Chapter 2 Command System RIGOL
DG1000Z Programming Guide 2-39
:LXI:MDNS:ENABle
Syntax :LXI:MDNS:ENABle {ON|1|OFF|0}
:LXI:MDNS:ENABle?
Description Enable or disable the multiple DNS system (mDNS).
Query the status of the multiple DNS system (mDNS).
Parameter Name Type Range Default
{ON|1|OFF|0} Bool ON|1|OFF|0 ON
Return Format The query returns ON or OFF.
Example :LXI:MDNS:ENAB ON /*Enable the multiple DNS system*/
:LXI:MDNS:ENAB? /*Query the status of the multiple DNS system and the
query returns ON*/
:LXI:MDNS:HNAMe
Syntax :LXI:MDNS:HNAMe[:RESolved]?
Description Query the host name of the mDNS analyzed.
:LXI:MDNS:SNAMe:DESired
Syntax :LXI:MDNS:SNAMe:DESired
:LXI:MDNS:SNAMe:DESired?
Description Set the service name of mDNS.
Query the service name of mDNS.
Parameter Name Type Range Default
ASCII string
Refer to the
“Explanation”
rigollan
Explanation  is a string and can include English letters and numbers.
 This setting is stored in the non-volatile memory and will not change when the
instrument is turned off and then turned on again or when the *RST command
is sent.
 Sending the :SYSTem:SECurity:IMMediate command will set the service name
of mDNS to its default.
Return Format The query returns a string, for example, RIGOL1.
Example :LXI:MDNS:SNAM:DES RIGOL1 /*Set the service name of mDNS to RIGOL1*/
LXI:MDNS:SNAM:DES? /*Query the service name of mDNS and the query
returns RIGOL1*/
Related
Command
:SYSTem:SECurity:IMMediate