RIGOL DG1000Z Series - Manual (Page 168)

RIGOL Chapter 2 Command System
2-156 DG1000Z Programming Guide
[:SOURce[]]:PULSe:HOLD
Syntax [:SOURce[]]:PULSe:HOLD {WIDTh|DUTY}
[:SOURce[]]:PULSe:HOLD?
Description Set the highlight item of the specified channel to the pulse width (WIDTh) or pulse
duty cycle (DUTY).
Query the item highlighted in the specified channel (the pulse width or pulse duty
cycle).
Parameter Name Type Range Default
[] Discrete 1|2 1
{WIDTh|DUTY} Discrete WIDTh|DUTY DUTY
Return Format The query returns WIDT or DUTY.
Example :SOUR1:PULS:HOLD WIDT /*Set the item highlighted in CH1 to pulse width*/
:SOUR1:PULS:HOLD? /*Query the item highlighted in CH1 and the query
returns WIDT*/
[:SOURce[]]:PULSe:TRANsition[:LEADing]
Syntax [:SOURce[]]:PULSe:TRANsition[:LEADing] {|MINimum|MAXimum}
[:SOURce[]]:PULSe:TRANsition[:LEADing]? [MINimum|MAXimum]
Description Set the pulse rise time of the specified channel.
Query the pulse rise time of the specified channel.
Parameter Name Type Range Default
[] Discrete 1|2 1
Real 10ns to 0.625×pulse width 20ns
Explanation  The rise time is defined as the time required for the pulse amplitude to rise
from 10％ to 90％.
 When [:SOURce[]] or [] is omitted, the system sets the related
parameters of CH1 by default.
 The range of the rise time is limited by the current waveform frequency and
pulse width. When the specified value exceeds the limits, the instrument will
adjust the edge time automatically to make it match the specified pulse width.
Return Format The query returns the pulse rise time in scientific notation with 7 effective digits, for
example, 3.500000E-08 (the pulse rise time is 35ns).
Example :SOUR1:PULS:TRAN 0.000000035 /*Set the pulse rise time of CH1 to 35ns*/
:SOUR1:PULS:TRAN? /*Query the pulse rise time of CH1 and the
query returns 3.500000E-08*/