Yaskawa J50M Instructions - Manual (Page 295)

Table A6.6 Range of Data Setting
Address
Least input increment
Max stroke (Distance
from reference point)
Tool offset amount &
Tool radius value
Min. feed amount at
/H A N D L E
Unit of area
Program
designation
setting for
stored
Parameter &
stroke limit
setting
Rapid traverse rate
Manual jog speed
Seed at Fo
Max. feedrate
Dry run speed
Stored compen-
sation, stored stroke
limit, and setting area
for 2nd to 4th reference
points
Backlash compensation
Metric Output Inch Output
Metric Input . Inch Input Metric Input Inch Input
0.001 or 0.0001 or 0.001 or 0.0001 or
0.01 m m 0.001 in. 0.01 mm 0.001 in.
99999.999 mm 3937.0074 in. 9999.9999 in.
o
to
o
to
o to o to
999.999 mm 99.9999 in. 999, 999 mm 99.9999 in.
0.001 mm 0.0001 in. 0.001 mm O. 0001 in.
0.001 mm
I
0.0001 in.
I
0.001 mm
I
0.0001 in.
I I
O. 001 mm
I
0.0001 in.
(7.5 to) 1 to 30000 mm/min (0.75 to) 0.1 to 30000.0
30000
I
0.1 to 3000.0 in. /rein
O to *99999.999 mm.
O t o 0 to
3937.0078 in. 9999.9999 in.
(O : Reference point position)
8191 pulses 8191 pulses
O to 15 pulses O to 15 pulses
O to 127 pulses O to 127 pulses
Note: 1 pulse = least output increment
2 8 7