Yaskawa J50M Instructions - Manual (Page 210)

APPENDIX-1 LIST OF SETTING NUMBERS
Setting numbers are classified in the following
three groups:
Table Al. 1
Setting number Group
#6000 to 6004 Setting by bit
#6200 to 6219 Setting word
#6500 to 6599 Setting by double words
#6700 to 6771 Setting by double words
#6772 to 6899 Setting double words
Appendix table 1-2 lists setting numbers and
their functions.
NUMBERS AND THEIR CONTENTS
137 1: Sets
O: Sets
D5 1: Sets
O: Sets
D7 D5 1)3
punch-out code to ISO
punch-out code to EIA
playback ON
playback ON /OFF with an external
switch
D3, D2, DO
Selects whether to make the mirror image of the
4th axis, Z-axis, Y-axis and X-axis effective in
successive order or to make them external
switches.
1: Mirror image effective
O: External switch
D7 1: Emits operating panel buzzer sound
O: Does not emit operating panel buzzer
sound
D4 Z-axis canceling switch
1: ON
0: OFF
D 3 Manual absolute switch
1: ON
O: OFF
D2 Editing lock switch
1: ON
O: OFF
1: Checks the 2nd prohibited area of stored
stroke limit
O: Does not check the 2nd prohibited area
of stored stroke limit
DO 1: Specifies input units as inch inputs
Specifies input units as metric inputs
D6 D5 DO
D7
D6
D5
D4
D3
D2
DO
Auxiliary function lock switch
1: ON
O: OFF
Machine lock switch
1: ON
0: OFF
Optional stop switch
1:
O: OFF
Dry run switch
1: ON
O: OFF.
Optional block skipping switch
1: ON
0: OFF
Display lock switch
1: ON
O: OFF
Start lock switch
1: ON
0: OFF
Single block switch
1: ON
0: OFF
D5 “4 “3 “1 DO
D5, D4: Selects the output device of the
data input interface
D3 When outputting EOB in I SO code;
o:
Output with LF.
1: Output with CRLF.
DO: Selects the input device of the
data input interface
I
Input
I
output Parameter for
Device Device Setting Baud Rate
01
I
RS232C
I
RS232C
I
#6026 (#6028)
D3 to DO
202