Yaskawa J50M Instructions - Manual (Page 277)

Code Causes Causes
272
- - - - - - -
P-SET ERROR (Y) 282
----- ----- . . . . . ----- ---- ----- ----- ----- ---- ----
ZR POSITION ERROR
- - - ____
WITH REFERENCE POINT OFF.
P SET ERROR Y
(IF THIS ERROR OCCURS IN BLOCK WERE
GOO IS CHANGING TO
MACHINE STOPS
AFTER COMPLETION OF GOO BLOCK).
273
-----_--
P-SET ERROR (Z) 283
------- -------- --------- ----- --- -------------- --------
P SET ERROR Z
(IF THIS ERROR OCCURS IN BLOCK WHERE
GOO IS CHANGING TO GO I , MACHINE STOPS
COMPLETION OF GOO BLOCK).
P-SET ERROR (4) 284
------- ------- ----- ------ ------ . . . ..- ------- ------
ZR POSITION ERROR (Z)
------ ----- ---- . . . . -------- ------- -----
REFERENCE POINT RETURN COMPLETED
WITH REFERENCE POINT OFF.
274 ZR POS1TION ERROR (4)
. ----- ----- . ----- . . ---- ----- .
POINT CO MPLETED
WITH REFERENCE POINT OFF.
P SET ERROR 4
(IF THIS ERROR OCCURS IN BLOCK WHERE
GOO IS CHANGING TO
GO1, MACHINE STOPS
AFTER COMPLETION OF GOO BLOCK).
275
--------
285
--------
276
-------
P-SET ERROR (S)
------- ----------- ------ ------ --
PROGRAM SET ERROR S.
SPINDLE P-SET ERROR AT SOLID
TAPPING.
286
- - - - - -
287
----
277
---
278
----- ---
288
279
------ .
289
-------
280 MACHINE UNREADY
-- — — ----------- ------ . . . . . . . . . . .. --— --------- -
MACHINE NOT READY
290
------
ZR POSITION ERROR (X)
------ . ----- . . . . . . . . . . ------ ---------------- ------
REFERENCE POINT COMPLETED
WITH REFERENCE POINT LS OFF.
291
------
281