Yaskawa J50M Instructions - Manual (Page 142)

4. NC OPERATOR’S PANEL WITH 9“ CRT CHARACTER DISPLAY
4.1 PUSHBUTTONS, LAMPS AND KEYS
Fig. 4.1 shows an overall view of NC operator’s
panel with 9“ CRT display. The names and func-
tions of operator devices are as follows.
9 “ C R T
FUNCTION
Fig. 4.1 Standard NC Operator’s Panel wtth 9“ CRT Character Display
(Keyboard on Right Side of CRT)
4.1.1 POWER ON/OFF PUSHBUTTONS
. POWER ON pushbutton
To turn on the power for the control: Depress
the pushbutton once to turn on the control
power and depress it again to turn the servo
p o w e r . Push this button to recover the servo
power after an emergency stop.
. POWER OFF pushbutton
To turn off the power for the control: Depress
POWER OFF pushbutton to turn off both the
servo and control powers.
o
0
Fig. 4.2
134