Yaskawa J50M Instructions - Manual (Page 276)

Table A5.2 List of Alarm Codes (Cent’d)
Code Causes Code Causes
252 S-0T3-5 262 ZR ERROR PRM (Y)
- - - - - - - -—-. ---- ---- —--
STORED STROKE LIMIT 3RD, 4TH,
- - - ----
RETRACTION BY REFERENCE
5TH AREA OUTSIDE PROHIBITED Y . RETURN (ER PULSE AT C PHASE
LATCH > #6305)
253 S-0T3-5 (Z) 263 ZR ERROR PRM (Z)
STORED STROKE LIMIT 3RD , 4TH, - BY REFERENCE POINT
5TH AREA OUTSIDE PROHIBITED Z. RETURN PULSE AT C PHASE
LATCH
254 264
ZR ERROR PRM (4)
----- --- --------- ----- ------ - ----- ----- ----- ------ - . . - . —--- ---- - ---- ---- -----
RETRACTION BY REFERENCE POINT
RETURN (ER PULSE AT C PHASE
LATCH
255 ZR ERROR (X)
265
----- --- ----- ----- ---- -. —-------- ------- ---- ________ _ — ---------- ----- --- —--
LS ERROR (X) DECELERATION
OF X-AXIS STARTS CHAT-
TERING ON THE DOG)
256 ZR DECLS ERROR (Y) 266
----- -- —--- --------- —--- -— — — --- —------ - - - - - -
LS ERROR (Y) DECELERATION
OF Y AXIS STARTS CHAT-
TERING ON THE DOG)
257 ZR DECLS ERROR (Z) 267
-------- ------------ ----- .-- — — ------- —-------- -— ------ — ------- . ..-. .-- —-- ——-—--— ——— --- ---. —-—---—
LS ERROR (Z) DECELERATION
OF Z AXIS STARTS
ON THE DOG)
258 ZR ERROR (4) 268
. ------ ------ --------- ------ -------- -- ------ -- --—---—— ---—- ---—----—- ---— ---- ----- --
LS ERROR (4) DECELERATION
OF 4 AXIS STARTS CHAT-
TERING ON
259 269
------------------------------------ ----- -- ----- ----- ----- ------ ---- ---- ..-
260 270
- - - - - - - ------ ------ ---- ---- --- —--- - ---- ----- —.-. ----- .-— . - - - - --
----------------------
‘ ‘-----S IN BLOCK WHERE
01, MACHINE STOPS
LATCH #6304) AFTER COMPLETION OF GOO BLOCK).