Chapter 3 installing the level 2 storage system – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual
Page 82

82
K2 Storage System Instruction Manual
September 6, 2006
Chapter 3 Installing the Level 2 Storage System
System, as described in the following table:
On this page…
Do this…
Define server roles
Enter the name or IP address for the media server, as currently
configured on the machine.
For Level 2, leave all roles selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on the
Level 2 K2 Media Server is
as follows:
•
SQL Server
•
K2 Server
•
File System Server
•
File System Client
•
SNMP Services
If software with Yes in the Required column reports as Not Installed, you
must first install it on the media server before continuing. Refer to
Chapter 10,
Managing K2 software. After installing the software, click
Check Software
. When all required software reports as Installed, click
Next
.
NOTE: QuickTime 7 is also required.