Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 47)

September 6, 2006 K2 Storage System Instruction Manual 47
Configuring the L1 device - Part 1
Your K2 Storage System appears in the tree view of the K2 System Configuration
application.
5. Continue with the next procedure.
Configuring the L1 device - Part 1
1. In the K2 System Configuration application tree view, select [ PrimaryK2Server] .
NOTE: The Level 1 device is represented as a K2 Media Server in the K2 System
Configuration application.
2. Click the Configure button. The Configure K2 Server wizard opens.
Follow the on-screen text to configure the L1 device for a Level 1 K2 Storage
Page 3
Review the information on this page and verify that you have correctly
defined your K2 Storage System.
For a Level 1 storage system you should have the following:
• One Gigabit Ethernet switch
• One K2 Media Server (this is the L1 device)
• The number and type of clients appropriate for your system.
Click Finish . The Define New K2 Storage System wizard closes.
On this page… Do this…