Configuring the media server 1a - part 1 – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual
Page 223
September 6, 2006
K2 Storage System Instruction Manual
223
Configuring the media server 1A - Part 1
Your K2 Storage System appears in the tree view of the K2 System Configuration
application.
5. Continue with the next procedure.
Configuring the media server 1A - Part 1
1. In the K2 System Configuration application tree view, select [
PrimaryK2Server]
.
2. Click the
Configure
button.
The Configure K2 Server wizard opens.
Follow the on-screen text to configure the media server for a Level 3R K2 Storage
Page 3
Review the information on this page and verify that you have correctly
defined your K2 Storage System.
For a Level 3R storage system you should have the following:
•
Two Gigabit Ethernet switches
•
Four K2 Media Servers
•
The number and type of clients appropriate for your system.
Click
Finish
. The Define New K2 Storage System wizard closes.
On this page…
Do this…