Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 159)

September 6, 2006 K2 Storage System Instruction Manual 159
Setting up the Level 3 GigE switch
b. Select all the odd numbered ports. (Tip: Use Ctrl + Click.)
c. In the Mode drop-down list, select Untagged , then click Apply . This removes the
odd ports from the default (Control) VLAN.
If you have a trunk, do not configure it as “Tagged”. Media VLAN traffic
(iSCSI) does not go over the trunk.
13.Click the VLAN Configuration tab.
14.If you have a trunk, configure the default (Control) VLAN as follows:
a. In the DEFAULT_VLAN row, click Modify .
b. In the Current Mode list box, scroll down and select the trunk. (In the
configuration for 10 Gig ISLs, ports 25 and 26 are Trk1)
c. In the Mode drop-down list, select Tagged , then click Apply . This allows default
VLAN traffic (non-iSCSI) to go over the trunk.
15.Click the VLAN Configuration tab.