Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 114)

114 K2 Storage System Instruction Manual September 6, 2006
Chapter 4 Installing the Level 2R Storage System
the control point PC and the NetCentral server PC are the same PC or are different
PCs, you must still add the control point PC to NetCentral.
In addition, NetCentral automatically changes its view of the K2 Storage System
whenever you use the K2 System Configuration application to do one of the
following:
• Remove a K2 Storage System
• Rename a K2 Storage System
• Add a device to a K2 Storage System
• Remove a device from a K2 Storage System
Refer to the NetCentral User Guide to set up the NetCentral system. After installing
a device provider, you can find additional documentation about monitoring that type
of device on the NetCentral Help menu.