Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 290)

290 K2 Storage System Instruction Manual September 6, 2006
Chapter 7 Installing the Nearline Storage System
previous procedure. That media server is now the acting media file system server. If
you have more than one media server, you can now configure the remaining media
servers using the following procedure.
1. In the K2 System Configuration application tree view, select the media server you
are configuring.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a nearline K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured
media server.
On this page… Do this…
Define server roles
Enter the name or IP address for themedia server, as currently configured
on the machine.
For Nearline server roles, selections are disabled. Leave
SNFS file
system server , FTP server , and NAS server selected.
Click Next