Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 46)

46 K2 Storage System Instruction Manual September 6, 2006
Chapter 2 Installing the Level 1 Storage System
4. Follow the on-screen text to define your Level 1 K2 Storage System, as described
in the following table.
On this page… Do this…
Page 1
Create a name for your Level 1 K2 Storage System and type it in the
Name box.
Select
Level 1 .
The Server redundancy option is unchecked and disabled.
Click
Next
Page 2
Move clients into the Number of Devices box as appropriate for your
system.
You cannot change the number of K2 Media Servers or Ethernet
Switches, as these are pre-configured based on the level you selected in
the previous page.
Note: The Level 1 device is represented as a K2 Media Server in the
K2 System Configuration application.
Click Next .