beautypg.com

Chapter 6 installing the level 3r storage system – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual

Page 240

background image

240

K2 Storage System Instruction Manual

September 6, 2006

Chapter 6 Installing the Level 3R Storage System

are based on the configurations already completed on a previously configured
media server.

On this page…

Do this…

Define server roles

Enter the name for the media server. This should be the current network
name of the machine.
For Level 3 redundant, select iSCSI bridge, FTP server, and NAS server.
Click

Next

Software Configuration

This page checks for the
software required to support
the roles you selected on the
previous page.

Software required on a Level
3R K2 Media Server 2A is as
follows:

K2 Server

File System Client

If software with Yes in the Required column reports as Not Installed, you
must first install it on the media server before continuing. Refer to

Chapter 10,

Managing K2 software. After installing the software, click

Check Software

. When all required software reports as Installed, click

Next

.

NOTE: QuickTime 7 is also required.

This manual is related to the following products: