Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 40)

40 K2 Storage System Instruction Manual September 6, 2006
Chapter 2 Installing the Level 1 Storage System
Networking for Level 1
Use the topics in this section to configure the Gigabit Ethernet (GigE) network for the
Level 1 storage system.
• “Networking requirements” on page 40
• “Networking tips” on page 41
• “Setting up host tables” on page 41
• “Testing the control network” on page 42
Networking requirements
Required networking strategies for a Level 1 K2 Storage System (a non-redundant K2
Storage System) are as follows:
• Three networks:
• Media network — Exclusively for iSCSI traffic.
• Streaming/FTP network — For media transfers and FTP traffic.
• Control network — For all other non-streaming, non-iSCSI traffic.
• Networks must be on separate subnets.
• The Media (iSCSI) network traffic is kept separate from any other traffic. This
separation is provided by dedicated Gigabit ports, cables, and by a dedicated
VLAN on the HP GigE switch or by separate switches.
• K2 Media Servers have a dedicated FTP port. If the server takes the role of FTP
server, make a dedicated FTP connection to the FTP port.
• While control and FTP traffic is each on its own subnet, it is not required that each
type of traffic has its own VLAN on GigE switches. For example, you make both
FTP and control connections to the “control” ports (DEFAULT_VLAN) on the HP
GigE switch.
• Static IP addresses are required for the media network on K2 Storage System iSCSI
devices. This includes the Level 1 device iSCSI clients (such as Aurora Edits), and
K2 Media Clients.
• Machine names (host names) assigned to each K2 device.
• Host tables (hosts files) provide name resolution on each K2 Media Client, iSCSI
client, and Level 1 device.
• IP addresses for FTP/streaming ports must have name resolution such that
hostnames are appended with the “_he0” suffix. You can use host tables (as in
“Setting up host tables” on page 41 ) or another mechanism to provide the name
resolution. This directs the streaming traffic to the correct port. Refer to the K2
Media Client System Guide for a complete explanation.
• Level 1 devices must be on the streaming network, as they provide the FTP
interface for shared storage streaming traffic. External (shared) storage K2 Media
Clients do not need to be on the streaming network because they do not send or
receive streaming traffic.