Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 48)

48 K2 Storage System Instruction Manual September 6, 2006
Chapter 2 Installing the Level 1 Storage System
System, as described in the following table:
On this page… Do this…
Define server roles
Enter the name or IP address for the L1 device, as currently configured
on the machine.
For Level 1, leave all roles selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
1 device is as follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
If software with Yes in the Required column reports as Not Installed, you
must first install it on the L1 device before continuing. Refer to
Chapter
10, Managing K2 software. After installing the software, click Check
Software . When all required software reports as Installed, click Next .
NOTE: QuickTime 7 is also required.