Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 124)

124 K2 Storage System Instruction Manual September 6, 2006
Chapter 4 Installing the Level 2R Storage System
System, as described in the following table:
On this page… Do this…
Define server roles
Enter the name or IP address for the media server, as currently
configured on the machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the media server is connected.
For Level 2 redundant, leave all roles selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on the
Level 2R K2 Media Server A
is as follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
If software with Yes in the Required column reports as Not Installed, you
must first install it on the media server before continuing. Refer to
Chapter 10, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .
NOTE: QuickTime 7 is also required.