Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 241)

September 6, 2006 K2 Storage System Instruction Manual 241
Configuring media server 2A
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
NOTE: This page
does not configure
the iSCSI interface
(media network)
ports.
The top port is the port over which the K2 System Configuration
application is communicating with the media server. If correctly
configured, it is already assigned the control network IP address, as
displayed on this page.
Select the other port and click
Modify . A network configuration dialog
box opens. Enter the FTP/Streaming IP address and the subnet mask and
click
Apply .
Click Next .
NOTE: QuickTime 7 is also required.
File System Client
Configuration
This media server does not
function as a file system
server. It does function as a
file system client, which is
validated from this page.
Click Check . When the wizard reports that the configuration check is
successful, click Next .
On this page… Do this…