beautypg.com

Chapter 3 installing the level 2 storage system – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual

Page 70

background image

70

K2 Storage System Instruction Manual

September 6, 2006

Chapter 3 Installing the Level 2 Storage System

Do not swap Expansion chassis or otherwise reconfigure storage. If you connect a
L2 RAID Expansion chassis to the wrong controller such that the Expansion
chassis contains disk modules that were bound using a different controller you will
lose your media file system.

Set the chassis address to 1 on both
L2 RAID Expansion adapters.

1

Chassis

Address = 1

ID = "0"

4 3

2 1 ON

This manual is related to the following products: