Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 139)

September 6, 2006 K2 Storage System Instruction Manual 139
Adding K2 Storage System clients
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Your configurations for the Level 2R K2 Storage System are complete.
Adding K2 Storage System clients
You can add now clients, such as K2 Media Clients or Aurora Edits, to the K2 Storage
System and configure them using the K2 System Configuration application.
• For Aurora Edits, refer to the Aurora Share Technical Reference Guide for
instructions.
• For K2 Media Clients, refer to K2 Media Client System Guide for instructions.
Database Server
Configuration
You do not need to enter or configure anything on this page.
Click
Next .
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished. If you are not sure if startup
is complete, wait 10 minutes.
On this page… Do this…