Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 188)

188 K2 Storage System Instruction Manual September 6, 2006
Chapter 5 Installing the Level 3 Storage System
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3 K2 Media Server 2 is as
follows:
• K2 Server
• File System Client
•
If software with Yes in the Required column reports as Not Installed, you
must first install it on the media server before continuing. Refer to
Chapter 10, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .
NOTE: QuickTime 7 is also required.
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
NOTE: This page
does not configure
the iSCSI interface
(media network)
ports.
The top port is the port over which the K2 System Configuration
application is communicating with the media server. If correctly
configured, it is already assigned the control network IP address, as
displayed on this page.
Select the other port and click
Modify . A network configuration dialog
box opens. Enter the FTP/Streaming IP address and the subnet mask and
click
Apply .
Click Next .
NOTE: QuickTime 7 is also required.
On this page… Do this…