Sample network configuration and hosts file – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual
Page 331

September 6, 2006
K2 Storage System Instruction Manual
331
Sample network configuration and hosts file
The following example shows the contents of a default Windows hosts file with new
lines added that match the IP addresses and host names in the previous sample
diagram.
All lines beginning with a # are comments and can be ignored or deleted.
# Copyright (c) 1993-1995 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
K2-MediaClient
(internal storage)
Stand-alone
NewsEdit1
(not shared storage)
SAN_XP1
SAN_UIM1
K2-MediaClient-2
(shared storage)
K2-Media Server-1
Control Point PC
10.0.0.22
Other 3rd party devices
Command/Control network
Media/Streaming network
10.16.42.10
10.0.0.10
10.16.42.102
10.16.42.60
10.0.0.60
Note: GigE ports 2 and 4 used for media
(iSCSI) networks only
10.16.42.22
10.16.42.31
10.16.42.32
10.0.0.32
10.16.42.23
K2-MediaClient-1
(shared storage)
10.16.42.101