Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 320)

320 K2 Storage System Instruction Manual September 6, 2006
Chapter 10 Managing K2 software
The Acronis True Image program loads.
The Acronis True Image main window appears.
5. In the Acronis True Image main window, click Backup .
The Create Backup Wizard opens.
6. On the Welcome page, click Next .
The Select Backup Type page opens.
7. Select The entire disk contents or individual partition and then click Next .
The Partitions Selection page opens.
8. Select the System (C:) and the Database (D:) partitions and then click Next .
The Backup Archive Location page opens.
9. In the tree view select the Backup (E:) partition and then enter the name of the image
file you are creating. Create the file name using the K2 Media Server or Level 1
device hostname and the date. Name the file with the .tib extension. For example,
if the hostname is K2Server1, in the File name field you would have
E:\K2Server1_20051027.tib
. Click Next .
The Backup Creation Options page opens.
10. Do not change any settings on this page. Click Next .
The Archive Comment page opens.
11. If desired, enter image comments, such as the date, time, and software versions
contained in the image you are creating. Click Next .
The “…ready to proceed…” page opens.
12. Verify that you are creating images from the C: and D: partitions and writing to the
E: partition. Click Proceed .
The Operation Progress page opens and displays progress.
13. When a “Backup archive creation has been successfully completed” message
appears, click OK .
14. Click Operations | Exit to exit the Acronis True Image program.
The K2 Media Server or Level 1 device restarts automatically.
15. Remove the Recovery CD while the K2 Media Server or Level 1 device is shutting
down.
16. Upon restart, log on to Windows.
17. Open Windows Explorer and find the image file on the E: partition.
Creating a recovery disk image CD set
Do the following at the local K2 Media Server or Level 1 device to create a disk image
of the entire system drive, which includes the C:, D:, and E: partitions, and store the
image file on a set of CDs:
1. Make sure that media access is stopped and that the K2 Media Server or Level 1
device on which you are working is out of service.