Configuring the redundant media server 2b – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual
Page 243
September 6, 2006
K2 Storage System Instruction Manual
243
Configuring the redundant media server 2B
media server.
On this page…
Do this…
Define server roles
Enter the name for the media server. This should be the current network
name of the machine.
For Level 3 redundant, select iSCSI bridge, FTP server, and NAS server.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3R K2 Media Server 2B is as
follows:
•
K2 Server
•
File System Client
If software with Yes in the Required column reports as Not Installed, you
must first install it on the media server before continuing. Refer to
Chapter 10,
Managing K2 software. After installing the software, click
Check Software
. When all required software reports as Installed, click
Next
.
NOTE: QuickTime 7 is also required.