Chapter 6 installing the level 3r storage system – Grass Valley K2 Storage System Instruction Manual v.3.1 User Manual
Page 224

224
K2 Storage System Instruction Manual
September 6, 2006
Chapter 6 Installing the Level 3R Storage System
System, as described in the following table:
On this page…
Do this…
Define server roles
Enter the name or IP address for the media server, as currently
configured on the machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the media server is connected.
For Level 3 redundant server roles, leave
SNFS file system server
,
iSCSI bridge
, and
Media database server
selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3R K2 Media Server 1A is as
follows:
•
SQL Server
•
K2 Server
•
File System Server
•
File System Client
•
SNMP Services
If software with Yes in the Required column reports as Not Installed, you
must first install it on the media server before continuing. Refer to
Chapter 10,
Managing K2 software. After installing the software, click
Check Software
. When all required software reports as Installed, click
Next
.
NOTE: QuickTime 7 is also required.