NewTek TriCaster Advanced Edition User Guide - Manual (Page 33)

Page | 21
FIGURE 15 – TRICASTER 410
FIGURE 16 – TRICASTER MINI
Note: Hardware details as depicted are subject to change without prior notice.
If your equipment supports SDI, this is the best quality option.
1. Connect sources to suitable connectors in the VIDEO IN section: SDI, HDMI (TriCaster Mini only),
Component, Y/C (S-Video), or Composite (may require RCA> BNC adapter).
a. SDI – Attach your SDI source connectors to one of the BNC connectors in the Video In group marked
SDI.
b. HDMI (TriCaster Mini only) – Connect your HDMI source cables to HDMI inputs on the front of the
unit.
Note: The analog video input connection options listed next are not provided by TriCaster 410 or Tricaster Mini.
c. Component – Attach the appropriate BNC connectors from your sources to all three analog
BNC connectors (labeled Y, Pb and Pr) in a column of the Video In group.
d. Y/C – If your S-Video equipment and cabling has the usual 4-pin mini-DIN connectors, you
will need an S-Video to dual BNC adapter.