NewTek TriCaster Advanced Edition User Guide - Manual (Page 299)

Page | 287
11. Input D is meant to feed animated text (whether from a DDR, or perhaps a Network Input source such
as LiveText) to the various news tickers in the scene.
Your animated text should be centered vertically in the frame, and presented over either a transparent
or black background. The font size need not be overly large, but you can use the Position tools for the
Input D layer to scale and reposition it as necessary.
Hint: If you temporarily select M/E 2 on Program output, you’ll see how this quad source is arranged (prior to being
fed to Input D of M/E 1).
A.3.6 INITIATE STREAMING?
1. Connect TriCaster to the Internet (see Section 3.15).
2. Open (or create) a TriCaster session (see Section 3.9).
3. Click the Configure (gear) button in the Dashboard’s Stream control area.
4. Supply Connection parameters in this panel as required (passwords, username, etc.
5. Close the panel, and – when ready – click the Stream button.
(See Chapter 18 for full details.)
A.3.7 FIND MY CAPTURED STREAM FILE?
1. Go to Locate the Home Page of the Startup Screen and click Open.
2. Click the name of the session you streamed at right.
3. Click the Manage icon on the Session Page.
4. Under Browse at right, click the Clips link. A system file explorer will open.
5. Open the Saved Streams folder in the file explorer.
A.3.8 RECORD MY PROGRAM?
1. Open (or create) a TriCaster session (see Section 3.9).
2. Click the Configure (gear) button in the Dashboard’s Record control.
3. Choose your recording options (see Chapter 20, Record and Grab) and enter a Base Name for the
file(s).
4. Close the panel, and – when ready – click the Record button.