NewTek TriCaster Advanced Edition User Guide - Manual (Page 245)

Page | 233
 You multi-delegate these three M/Es.
 You push the Zoom Rate button once. The rate for M/E 1 increments to “M”. (M/E 2 and 3 are not
affected.)
 You push the Zoom Rate button again. The rate for M/E 1 and M/E 2 are incremented to “F”; the Zoom
Rate for all three delegated M/Es is now synchronized.
You will see this synchronization method applied to the following controls:
 Media Players > Loop, Autoplay and Single
 Transition>Rate
 Transition>Select
 M/E > (Overlay) Trans Rate
 M/E > (Overlay) Trans Select
 M/E > Zoom Rate
 M/E > Overlay display state
22.4.4 SWITCHER CONTROLS
FIGURE 280
P ROGRAM AND P REVIEW
The Program and Preview rows each hold selection buttons as follows:
4. Camera 1 – (4 or 8); press Shift with 1-4 to access Cameras 5-8 when using a 460 CS with an 8-input
TriCaster
5. NET 1 and NET 2
6. Media Players:
a. DDR 1 and DDR 2
b. Graphics 1/2
c. BFR (BUFFER)/BLACK
d. M/E 1 - M/E 4 (or M/E 8)
(Press Shift with M/E 1-4 to access M/Es 5-8 when using a 460 CS with an 8-input
TriCaster)
Switcher row buttons are mutually exclusive, and the active selection button remains lit.