Gasboy 1000 Series FMS Operation Manual - Manual (Page 95)

05/29/03 10-1
Section 10
FUELING RESTRICTION COMMANDS
DESCRIPTION
You use fueling restriction commands to load into the system, values that correspond to encoded
indicators on the cards. For example, when you encode cards, you assign a fuel authorization
number from one to nine. You use the LF command to load allowable fuels for each number. The
user can access only the fuels that correspond to his authorization number.
Likewise, you assign a limitation number from one to nine when you encode cards. Then you use
the LL command to assign limitation values to each of those nine digits. The user is restricted to
the amount assigned to his limitation number.
Fueling Restriction Commands
The card information commands are:
● LF load fuel authorizations
● PF print fuel authorizations
● LL load fuel limitations
● PL print fuel limitations