Gasboy 1000 Series FMS Operation Manual - Manual (Page 115)

Fuel Allocation Option
05/29/03 14-3
AO - ALLOCATION OFFSET
Use the AO command to load a starting point, or offset, for the allocation table. For example, if
your system is configured for 200 allocation totalizers and the allocation offset is 1275, the
allocation table ranges from 1275 to 1474.
You cannot execute the AO command if any transactions are in progress. If you try, the system
displays this message: TRAN IN PROGRESS; the allocation offset remains unchanged.
1. At
the * prompt, type AO. The system displays: ALLOC OFFSET: XXXX
XXXX is the existing allocation offset.
2.
Type a new allocation offset and press RETURN.
To keep the existing allocation offset, press RETURN.
If the new allocation offset is acceptable, the * prompt reappears. If the allocation offset is
unacceptable, the system responds with question marks.
Example:
7QÂ
7HHQ9ÂQBBUAV0Â !Â!"'% ↵ Â
Â
Â