Gasboy 1000 Series FMS Operation Manual - Manual (Page 124)

GASBOY Series 1000
14-12 05/29/03
NZ - CONFIGURE TO PRINT NON-ZERO TOTALIZERS
Use the NZ command to configure the system to print only the allocation totalizers that have
allocation (non-zero). (See PA - Print Allocation Table later in this section). This command is
especially helpful for systems where only a small percentage of the totalizers contain non-zero
values.
1. At
the * prompt, type NZ. The * prompt appears.
Example:
Â
PbÂ
Â
Â