Gasboy 1000 Series FMS Operation Manual User Manual
Page 15
Introduction
4019
1-3
●
A magnetic stripe insertion reader or an optional optical card reader. Optical readers are not
supported for CFN systems.
●
An emergency shutdown button on the cabinet face to quickly shut down dispensing
equipment in case of emergency.
●
Built-in AC and RS-422 transient protection reduces problems caused by power surges.
●
To safeguard the system in a power failure, AC and DC power fail detect, deadman timer,
and pump control fail-safe circuits ensure an orderly shutdown so the system can return to
normal operation upon restoration. The system clock and memory are backed by batteries to
maintain the time and transaction data during power failures.
Optional Features
In addition to the standard features, your Series 1000 may have one or a combination of these
available options:
●
Activate Pump (AP) Data Entry Option - allows you to enter card data (Card, ID Field 1,
and ID Field 2) and an odometer/hours reading at the data terminal before activating a pump.
●
Dual Lockout Option - allows you to restrict system access by locking out a second 4-digit
field of your choice (in addition to card number). Dual lockout is not supported for
Commercial Fueling Network (CFN) systems.
●
Extended Pump Timeouts Option - allows you to extend the standard maximum timeout
from 180 seconds to 3600 seconds (1 hour).
●
Fuel Allocation Option - allows you to allocate predetermined amounts of fuel to a set
number of users.
●
Fuel Delivery and Dipstick Option - enables you to accept and record fuel delivery and
dipstick reading data using special cards at the Series 1000.
●
Gate Controller Option - enables you to use a dedicated Series 1000 to control a gate.
●
Hours Option - Provides prompts at the LCD for users who record fuel consumption by an
hour meter instead of an odometer.
●
Loadable Base Pump Option - allows you to assign different starting pump numbers for
sites having more than one Series 1000.
●
Manual Keypad Entry Option - provides an additional field that allows you to request
specific input from the Series 1000 user. This option is a standard feature for Commercial
Fueling Network (CFN) systems.
●
L/100KM (or LPH) Option - calculates and maintains liters-per-100 kilometers tallies for a
set number of your vehicles. This option can also be ordered to calculate liters-per-hour for
users’ equipment operating on an hour meter.
●
Multi-Level Password Option - allows two levels of password access: super user, which
can access all commands; and standard user, which can access only commands authorized
by the super user.